Inserting The Data Cassettes Into The Magazine - ADIC VLS AIT Installation And Operating Manual

Inserting the Data Cassettes into the
Magazine
The magazine for the VLS AIT holds 11 data cassettes. It includes a clear dust cover to
protect the cassettes and for easy storage. See Figure 8. Insert each cassette into a slot of the
magazine making sure that the write-protect switch is toward the bottom, facing the closed
side of the magazine (as illustrated).
Insert
C assette
O pen side of
m agazine
(tow ards V LS )
The open side of the magazine faces the VLS. Make sure each cassette touches the bottom
floor of the magazine.
Do not use wrap-around labels on the individual cassettes. Most labels use a removable
adhesive and have a tendency to curl or tear after multiple uses. This can jam the movement of
the VLS. Place labels only in the space provided on the cassette
W rite-P rotect S w itch
Figure 8. Magazine for VLS
Operation and Maintenance
M agazine C over
D ata C assettes
M agazine
C losed side of
m agazine
29