Quick Set Mode - Ambient Weather WS-5300 User Manual

change the hour setting. The RCC time will override the manual set time.
5. Set Minute. Press the
to change the minute setting. The RCC time will override the manual set time.
6. Set Date Format. Press the
to alternate the display between Month/Day (MD) and Day/Month (DM).
7. Set Year. Press the
change the year setting. The RCC time will override the manual set date.
8. Set Month. Press the
to change the month setting. The RCC time will override the manual set date.
9. Set Day. Press the
button to change the day setting. The RCC time will override the manual set date.
10. Wind Speed Units of measure. Press the
Press the + button to alternate the display units between km/h, mph, m/s, knots, and bft (or
Beaufort scale).
11. Wind Direction Calibration. Press the
the + button to change the wind direction (in increments of 22.5 degrees, or 8 point wind
rose). Reference Section 4.3 for more information on calibrating the wind direction.
12. Rainfall Units of Measure. Press the
the + button to alternate the display units between mm and inches.
13. Temperature Units of Measure. Press the
measure. Press the + button to alternate the display units between °F and °C.
Press the SET button to exit the SET mode.

5.2 Quick Set Mode

To enter the Quick Set mode from the normal mode, press (do not hold) the
turns on and the console beeps. The Quick Set mode can be exited at any time by either pressing the
button or waiting for the 30-second time-out to take effect. You can skip over any setting
HISTORY
by pressing the button again.
SET
1. Wind Speed Average vs. Wind Speed Gust. After entering the Quick Set Mode, the wind
speed value will begin flashing. Press the + button to alternate the display between average
and gust.
2. Rain Increments. Press the
alternate the display between 1 hour, 24 hour, week, month and total.
3. Resetting Total Rain. While the total rain is flashing (from the previous step), press and hold
the SET button for two seconds until the total rain reads 0 and the display beeps.
4. Outdoor Temperature, Dew Point and Wind Chill. Press the
temperature calculations (temperature, dew point and wind chill). The temperature will
Version 1.3
SET button to set the minute. Press the + button or
button to change the Month/Day format. Press the + button
SET
button to set the year. Press the + button or
SET
button to set the month. Press the + button or
SET
button to set the day of month. Press the + button or
SET
SET
SET
button to set the rainfall increments. Press the + button to
SET
©Copyright 2013, Ambient LLC. All Rights Reserved.
button to set the wind speed units of measure.
SET
button to calibrate the wind direction. Press
button to set the rainfall units of measure. Press
SET button to set the temperature units of
SET
MIN/MAX button
button to
MIN/MAX
button
MIN/MAX
MIN/MAX
button. The backlight
SET
button to view alternate
Page 14