Table of Contents
Advertisement
5.2 Set (Program) Mode
5.2.1 Set Mode Quick Reference Guide
Command
[SET] + 3 seconds
Enter Set Mode, Daylight Savings
Time (DST)
[SET]
Time Zone (TZ)
[SET]
12/24 Hour Format
[SET]
Latitude Location Hemisphere (LA)
[ALARM]
Latitude (whole number)
[ALARM]
Latitude (decimal number)
[SET]
Longitude Location Hemisphere
(LO)
[ALARM]
Longitude (whole number x 100)
[ALARM]
Longitude (whole number)
[ALARM]
Longitude (decimal number)
[SET]
Hour of Day
[SET]
Minute of Day
[SET]
Year
[SET]
Month of Year
[SET]
Day of Month
[SET]
Temperature Units of Measure
[SET]
Indoor Temperature Calibration
[SET]
Indoor Humidity Calibration
[SET]
Outdoor Temperature Calibration
[SET]
Outdoor Humidity Calibration
[SET]
Barometric Pressure Units of
Measure
[SET]
Relative Pressure Calibration
[SET]
Pressure Threshold for Forecast
[SET]
Storm Threshold for Forecast
[SET]
Exit Set Mode
5.2.2 Set Mode Operation
While in Normal Mode, press and hold the SET key for at least three seconds (until it beeps) to enter
the Set Mode. The first setting will begin flashing. You can press the SET key again to advance to
the next step, as defined below.
Note: In the Set mode, press the
the
+
key or MIN/MAX key for 3 seconds to increase/decrease rapidly.
Note: Press the SNOOZE key (or wait 30 seconds for timeout), and the Set Mode will return to
Normal Mode.
1.
Daylight Savings Time (DST). The DST (ON or OFF) setting will begin flashing. Press the
+ key to toggle between DST ON and DST OFF.
Version 3.0
©Copyright 2015, Ambient LLC. All Rights Reserved.
Mode
Press [+] to toggle OFF and ON
Press [+] to increase. [MIN/MAX] to decrease
Press [+] to toggle between 12 hour (12h) and
24 hour (24h) format
Press [+] to toggle between Northern (Nth) and
Southern hemisphere (Sth)
Press [+] to increase. [MIN/MAX] to decrease
Press [+] to increase. [MIN/MAX] to decrease
Press [+] to toggle between Western (WST) and
Eastern (EST) hemisphere
Press [+] to toggle between 1 and 0
Press [+] to increase. [MIN/MAX] to decrease
Press [+] to increase. [MIN/MAX] to decrease
Press [+] to increase. [MIN/MAX] to decrease
Press [+] to increase. [MIN/MAX] to decrease
Press [+] to increase. [MIN/MAX] to decrease
Press [+] to increase. [MIN/MAX] to decrease
Press [+] to increase. [MIN/MAX] to decrease
Press [+] to toggle between degF and degC
Press [+] to increase. [MIN/MAX] to decrease
Press [+] to increase. [MIN/MAX] to decrease
Press [+] to increase. [MIN/MAX] to decrease
Press [+] to increase. [MIN/MAX] to decrease
Press [+] to toggle between inHg and hPa
Press [+] to increase. [MIN/MAX] to decrease
Press [+] to increase. [MIN/MAX] to decrease
Press [+] to increase. [MIN/MAX] to decrease
+
key or MIN/MAX key to change or scroll the value. Hold
Settings
Page 10
Advertisement
Table of Contents
