Console Operation; Set Mode - Ambient Weather WS-5300 User Manual

5. Console Operation

Note: The display console has six buttons for basic operation:
button, button, and
ALARM
There are five modes of operation:
1. Set Mode to program the display
2. Quick Set Mode to change general display settings
3. Alarm Mode to set and clear alarms
4. Min/Max Mode to view and clear minimum and maximum values
5. History Mode to view historical values

5.1 Set Mode

To enter the Set Mode from the normal mode, press and hold the
on and the console beeps, and then release the button. The Set Mode can be exited at any time by
either pressing the
HISTORY
skip over any setting by pressing the
The button doubles as the minus (-) button.
MIN/MAX
Holding the + button or
MIN/MAX
1. Display (LCD) Contrast Level. After entering the Set Mode, the display contrast value will
Version 1.3
Figure 9
button.
MIN/MAX
button or waiting for the 30-second time-out to take effect. You can
SET button again.
button for two seconds will change the setting values rapidly.
©Copyright 2013, Ambient LLC. All Rights Reserved.
button, button,
SET +
SET button until the backlight turns
Page 12
HISTORY