Table of Contents
Advertisement
2. Attach the wind cups to the anemometer assembly (if necessary, some weather stations
come pre-assembled). Push the wind cups into the anemometer shaft, as shown in Figure 6.
Tighten the set screw with the Allen Wrench (included), as shown in Figure 6. Make sure
the wind cups spin freely.
3.4 Display Console
3.4.1 Display Console Layout
The display console layout is shown in Figure 7.
Note: The following illustration shows the full segments of the LCD for description purposes
only and will not appear like this during normal operation.
Version 1.3
Figure 6
©Copyright 2013, Ambient LLC. All Rights Reserved.
Page 7
Hide quick links:
Advertisement
Table of Contents
