Table of Contents
Advertisement
absolute pressure and relative pressure.
4.2 Set (Program) Mode
4.2.1 Set Mode Quick Reference Guide
Command
[SET]
+
3
Enter Set Mode, Daylight Savings
seconds
Time (DST)
[SET]
Time Zone (TZ)
[SET]
12/24 Hour Format
[SET]
Hour of Day
[SET]
Minute of Day
[SET]
Year
[SET]
Month of Year
[SET]
Day of Month
[SET]
Temperature Units of Measure
[SET]
Indoor Temperature Calibration
[SET]
Indoor Humidity Calibration
[SET]
Outdoor Temperature Calibration
[SET]
Outdoor Humidity Calibration
[SET]
Barometric
Measure
[SET]
Relative Pressure Calibration
[SET]
Pressure Threshold for Forecast
[SET]
Storm Threshold for Forecast
[SET]
Exit Set Mode
4.2.2 Set Mode Operation
While in Normal Mode, press and hold the SET key for at least three seconds to enter the Set Mode.
The first setting will begin flashing. You can press the SET key again to skip any step, as defined
below.
Note: In the Set mode, press the + key or MIN/MAX key to change or scroll the value. Hold
the + key or MIN/MAX key for 3 seconds to increase/decrease rapidly.
Note: Press the SNOOZE key (or wait 30 seconds for the programming mode to timeout), and
the Set Mode will return to Normal Mode.
1.
Daylight Savings Time (DST). The DST (ON or OFF) setting will begin flashing. Press the
+ key to toggle between DST ON and DST OFF.
2.
Time Zone Settings. Press the SET key again to adjust the Time Zone (TZ) setting.
Press the + key or MIN/MAX key to adjust the time zone from -12 to 12, based on the
number of hours from Coordinated Universal Time, or Greenwich Mean Time (GMT).
The following table provides times zones throughout the world. Locations in the eastern
hemisphere are positive, and locations in the western hemisphere are negative.
Version 2.1
©Copyright 2015, Ambient LLC. All Rights Reserved.
Mode
Press [+] to toggle OFF and ON
Press [+] to increase. [MIN/MAX] to decrease
Press [+] to toggle between 12 hour (12h) and
24 hour (24h) format
Press [+] to increase. [MIN/MAX] to decrease
Press [+] to increase. [MIN/MAX] to decrease
Press [+] to increase. [MIN/MAX] to decrease
Press [+] to increase. [MIN/MAX] to decrease
Press [+] to increase. [MIN/MAX] to decrease
Press [+] to toggle between degF and degC
Press [+] to increase. [MIN/MAX] to decrease
Press [+] to increase. [MIN/MAX] to decrease
Press [+] to increase. [MIN/MAX] to decrease
Press [+] to increase. [MIN/MAX] to decrease
Pressure
Units
of
Press [+] to toggle between inHg and hPa
Press [+] to increase. [MIN/MAX] to decrease
Press [+] to increase. [MIN/MAX] to decrease
Press [+] to increase. [MIN/MAX] to decrease
Settings
Page 9
Advertisement
Table of Contents
