Set Mode - Ambient Weather WS-2700 User Manual

4.1 Set Mode

The Set Mode allows you to change date, time, units of
measure and other important functions, as referenced in
Figure 8.
To enter the Set Mode, press and hold the SET/CH key
for two seconds (SET/CH + 2 seconds). To advance
each command, press (do not hold) the SET/CH key.
Command
SET/CH +
2 seconds
SET/CH
SET/CH
SET/CH
Version 1.0 ©Copyright 2020, Ambient LLC. All Rights Reserved.
Function
BEEP Turns on or off
the beep with
each keystroke
RST Reset max/min
daily at 12:00am
(on) or manually
(off)
ZON Time Zone (TZ)
DST Observe
Daylight Savings
Time (set to
OFF in Arizona
and Hawaii, ON
everywhere else)
Description
Page 21
Settings
Press TEMP/+ or
BARO/- to
toggle OFF and
ON
Press TEMP/+ or
BARO/- to
toggle OFF and
ON
Press TEMP/+ to
increase or
BARO/- to
decrease
(reference Figure
9).
Press TEMP/+ or
BARO/- to
toggle OFF and
ON