Alarm Mode; Setting Alarms - Ambient Weather WS-5300 User Manual

begin flashing. Press the + button to alternate the display between outdoor temperature, dew
point and wind chill.
Press the SET button to exit the SET mode.

5.3 Alarm Mode

5.3.1 Setting Alarms

To enter the Alarm mode from the normal mode, press (do not hold) the
backlight turns on and the console beeps. The high alarm values and the HIAL icon will be
displayed. To set the low alarm values, press the
displayed. To exit the alarm mode, press the
The following section outlines setting alarm values. The process is identical for high and low alarm
settings (depending on which alarm mode is displayed).
The high and low alarm modes can be exited at any time by either pressing the
waiting for the 30-second time-out to take effect. You can skip over any setting by pressing the
button again.
Holding the + button or
rapidly.
Note: If an alarm has not been set, dashes (--.--) will be shown. If an alarm is enabled, the alarm
icon will be turned on.
5.3.1.1 Setting High Alarms
1. Set Alarm Hour. After entering the High Alarm Mode (reference Section 5.3.1), press the
SET button and the alarm time hour will begin flashing. Press the + button or
button to change the alarm hour setting.
2. Set Alarm Minute. Press the
Press the + button or
To set the time alarm, press the
will turn on. To turn off the alarm, press the
will turn off.
3. Set High Wind Speed Alarm. Press the
will begin flashing. Press the + button or
setting.
To set the wind speed alarm, press the
the alarm icon
HI AL
and the alarm icon will turn off.
When the wind speed exceeds the alarm setting, the alarm will sound.
Version 1.3
ALARM
MIN/MAX button for two seconds will change the alarm setting values
button again and the alarm time minute will begin flashing.
SET
MIN/MAX button to change the alarm minute setting.
ALARM
ALARM
will be on. To turn off the alarm, press the
©Copyright 2013, Ambient LLC. All Rights Reserved.
ALARM button again and the LOAL icon will be
button again.
button while the time is flashing, and the alarm icon
button again, and the alarm icon
ALARM
button again and the high wind speed alarm
SET
button to change the wind speed alarm
MIN/MAX
button while the wind speed is flashing, and
button. The
ALARM
button or
HISTORY
SET
MIN/MAX
ALARM button again,
Page 15