Set Wind Units; Set Rain Units; Quick Set Mode; Outdoor Temperature, Wind Chill And Dew Point Display - Ambient Weather WS-1070 User Manual

Press the + key
be flashing.
is 4 hPa/hr).

5.1.5 Set Wind Units

Wind Units. Press the
SET
alternate the display unit between km/h, mph, m/s, knots, and bft (or Beaufort scale).
5.1.5

Set Rain Units

Rain Units. Press the SET
alternate the display unit between in and mm.

5.2 Quick Set Mode

While in the Normal mode, press the
be exited at any time by either pressing the
take effect. You can skip over any setting by pressing the
Holding the key
+ (increase) or MIN/MAX key (decrease)
rapidly.

5.2.1 Outdoor Temperature, Wind chill and Dew Point Display

Outdoor Temperature, Wind Chill and Dew Point Display. The outdoor temperature will begin
flashing. Press the + key to alternate the display between the outdoor temperature, wind chill and dew
point.

5.2.2 Relative and Absolute Pressure Display

Relative and Absolute Pressure Display. Press the
pressure will begin flashing. Press the + key to alternate the display between absolute and relative
pressure.

5.2.3 Average Wind Speed and Wind Gust

Average Wind Speed and Gust. Press the
speed will begin flashing. Press the + key to alternate the display between the 48 second Wind
Average Speed and Gust Speed (or the maximum wind speed in the update period, which is 48
seconds).

5.2.4 Rain Display and Reset

1. Rain Increment Display. Press the
will begin flashing. Press the + key to alternate the display between the 1 hour rain, 24 hour
rain, weekly monthly rain, and total rain (since reset).
2. Total Rain Reset. With the total rain flashing in the previous step, press and hold the
key for three seconds, and the total rain will reset to zero.

5.3 History Mode

While in the Normal mode, press the
Version 1.2
to adjust the pressure threshold from 3.0 to 9.0 hPa/hr (the default
key to set the wind units. The wind will begin flashing. Press the + key to
key to set the rain units. The rain will begin flashing. Press the + key to
key to enter the Quick Set Mode. The Quick Set mode can
SET
HISTORY
SET
SET
key to enter the History mode.
HISTORY
©Copyright 2010, Ambient LLC. All Rights Reserved.
key or waiting for the 10-second time-out to
key again.
SET
when in the Set mode will change values
key to change the pressure display. The
SET
key to change the wind speed display. The wind
key to change the rain increment display. The rain
SET
Page 13