Recording A Motion - Roland JP-8080 Owner's Manual

Recording a Motion ••••••••••••••••••••••••••••••••••••
Now let's create a Motion for the pattern that we recorded in the previous section.
8
1
Select the Performance P1: 88 (p.23).
2
Press PANEL SELECT [LOWER].
The indicator will light, and the Lower Patch will be selected.
3
Move the [CUTOFF FREQ] and [RESONANCE] to the center position.
4
Press [HOLD].
The indicator will light.
5
Follow steps 1–4 on page 38 to prepare for pattern playback, and playback the pattern
that you created in the previous section.
Since Hold is On, the pattern playback will continue to repeat even if you release the key.
6
While listening to the pattern, rotate [TEMPO] to set a tempo that will be convenient for
recording.
7
Hold down [REC] and press MOTION CONTROL [2] in time with the beginning of the
pattern.
The [REC] and [2] indicators will blink, and the following display will appear.
8
Press [LOOP LENGTH] (NUMBER [1]).
The indicator will light, and the display will show the length of the Motion.
46
2
9
3,11 3,12
8,9
10,13
4,14 6
7,15,16 7