Roland Boutique JP-08 Faq
Hide thumbs Also See for Boutique JP-08:

Advertisement

Roland Boutique JP-08 FAQ
Q&A
When I put the JP-08 in Dual mode, the UPPER part is no longer heard; why is this?
Although the JP-08 should be four-voice polyphonic, notes are cut off after the second note.
I specified "shuffle" on the step sequencer of a Boutique series unit, but the next time I turn on the power, the shuffle
setting returns to "off. "
Is a pattern that I create on the step sequencer of a Boutique series unit saved automatically?
I have trouble performing the start/stop operation on the step sequencer of a Boutique series unit.
Can I operate octave shift while in step sequencer mode on a Boutique series unit?
Can I use an external MIDI keyboard to step-record on a Boutique series unit?
Can I connect multiple Boutique series units to my PC or Mac and use them simultaneously.
Are there any points of caution to observe when connecting the OUTPUT and INPUT jacks of multiple Boutique series
units?
Can I change the parameters that are controlled by the ribbon controller of the Boutique series unit?
Can knob operations on a Boutique series unit transmit MIDI control change (CC) messages?
Can the delay time and LFO of a Boutique series unit be synchronized to the tempo?
After I input MIDI to a Boutique series unit, I can no longer produce sound with the ribbon controller.
Is the bend range of the Boutique series units memorized for each patch?
Sometimes a knob or fader operation on a Boutique series unit is not reflected in the sound.
The ribbon controller's LED on the Boutique series unit is blinking.
What is the range of the step sequencer tempo setting on Boutique series units?
Can I make the parameter value be held even after I take my finger off the C2 ribbon controller of the Boutique series
unit?
Can I change the sampling rate of the USB audio on a Boutique series unit?
What is the range of the delay time setting on Boutique series units?
When connecting two Boutique series units with an audio cable in chain mode, how should I set the volume of the
units?
Do the Boutique series units produce the same sound as the JUPITER-8/JUNO-106/JX-3P?
What parameters can be saved in a pattern of the Boutique series unit's step sequencer?
Does the step sequencer of the Boutique series units support velocity?
Can I input a tie in the step sequencer of the Boutique series units?
Can knob and slider movements be recorded in the step sequencer of the Boutique series units?
Is the chain mode of the Boutique series units valid even if a different model of unit is connected via a MIDI cable?
Can I connect Boutique series models via MIDI and make them play in synchronization?
What is the maximum number of Boutique series units that can be connected in chain mode?
1
Copyright © 2015 ROLAND CORPORATION
2
2
2
2
2
2
2
2
3
3
3
3
3
3
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
02

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Boutique JP-08 and is the answer not in the manual?

Questions and answers

Summary of Contents for Roland Boutique JP-08

  • Page 1 Roland Boutique JP-08 FAQ Q&A I cannot transmit the data using a micro USB cable. When I put the JP-08 in Dual mode, the UPPER part is no longer heard; why is this? Although the JP-08 should be four-voice polyphonic, notes are cut off after the second note.
  • Page 2 Roland Boutique JP-08 FAQ I cannot transmit the data using a micro USB cable. Do not use a micro USB cable that is designed only for charging a device. Charge-only cables cannot transmit data. When I put the JP-08 in Dual mode, the UPPER part is no longer heard; why is this? In Dual mode, the output from the PHONES and OUTPUT jacks is divided between “L ch: LOWER”...
  • Page 3 Roland Boutique JP-08 FAQ Yes. Set the MIDI transmit channel of your external MIDI keyboard to match the MIDI channel of your Boutique series unit. Can I connect multiple Boutique series units to my PC or Mac and use them simultaneously.
  • Page 4 Roland Boutique JP-08 FAQ If a note is input even once from the K-25M or from MIDI IN, the C1 preview function is disabled. When you turn the power off and on again, the preview function is enabled. Does the sound engine of the Boutique series support velocity? Yes, it supports velocity.
  • Page 5 Roland Boutique JP-08 FAQ The USB audio sampling rate is fixed at 44.1 kHz. What is the range of the delay time setting on Boutique series units? The delay time range is 20 msec to 700 msec. When connecting two Boutique series units with an audio cable in chain mode,...
  • Page 6 Can the Boutique units be powered via USB? They support being supplied with power from a computer’s USB ports. Roland does not guarantee operation with a USB power adaptor. What is the maximum number of Boutique series units that can be connected in...
  • Page 7 Roland Boutique JP-08 FAQ Up to three units is not a problem. Operation with more than three units depends on the conditions of use.

Table of Contents