Settings For Each Part (Performance Part); Setting The Midi Channel For Each Part - Roland JP-8080 Owner's Manual

An example of using Individual Trigger
Let' s try out the Individual Trigger function by playing a
MIDI keyboard connected to REMOTE KBD IN.
1
Select Performance P1:83.
2
Press and hold any desired notes in the Upper Part.
3
Play keys in the Lower Part.
The Upper Part will sound at the timing that the Lower
arpeggio sounds.
If you wish to create a sound using Individual Trigger, an
easy way to do so is to select the above Performance and
then adjust the sliders and knobs to your liking to create the
desired Performance.
118
Settings for Each Part
(Performance Part)
1
Press [EDIT].
The [EDIT] indicator will light and the BANK[1]–[8]
indicators will blink.
2
Press [PART] (BANK[3]) several times to select the
parameter whose settings you wish to modify.
* If you hold down [SHIFT] and press [PART], you will
return to the previous display page.
The [PART] indicator will light.
3
Press PANEL SELECT [LOWER]/[UPPER] to select
the Part whose settings you wish to modify.
If you press both [LOWER] and [UPPER] simultaneous-
ly, both indicators will light, and you can simultaneous-
ly edit the Patches of both Parts.
In this case, the panel will show the settings of the
Upper Patch.
4
Use [DEC]/[INC] to set the value.
5
When you finish making settings, press [EDIT] or
[EXIT].
The previous display will reappear.
The following five parameters can be set independently for
each part of the performance.
* For details on parameters, refer to the page given.
Part Transpose
"Transposing Your Performance (Part Transpose)"
(p.88)
Part MIDI CH (Part MIDI Channel)
Chorus Sync
Delay Sync
LFO Sync
Setting the MIDI Channel for
Each Part
Part MIDI CH
(Part MIDI Channel)
If you use the MIDI IN/OUT connectors, the musical data
for each part will be transmitted/received on this MIDI
channel. If you do not wish to use MIDI messages to select
the Patch of a Part, or to transmit/receive musical data via
MIDI, turn this setting OFF.
MIDI messages received at the REMOTE KBD IN will fol-
low the Remote Keyboard Channel settings (p.124), and
have no relation to the Part MIDI Channel setting.
1–16, OFF