Using The External Inputs - Roland JP-8080 Owner's Manual

Leave [CONTROL 2] at the position shown in the illustration, and rotate [CONTROL 1] to change the har-
monics in various ways.
When you move [CONTROL 1]/[CONTROL 2], the waveform name and parameter name will appear in
the display.
5
Using the same procedure, listen to the sound of other waveforms.
Rotate [CONTROL 1]/[CONTROL 2] to change the sound in various ways.
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
Using the External Inputs ••••••••••••••••••••••••••••••••
The sliders and knobs can be used to modify sounds from a MIDI keyboard, MIDI sound source, tape, or
CD that is connected to the rear panel EXT IN jacks, in the same way as the internal waveforms.
For this example, let's input the sound of a synthesizer (keyboard) in stereo.
26
For details on the settings of the OSC 1 section
"Selecting the Basic Waveform for the Sound (1) (Oscillator 1)" (p.66)
For details on other OSC related settings
"Selecting the Basic Waveform for the Sound (2) (Oscillator 2)" (p.68)
"Modifying the Waveform and Pitch of the Sound" (p.71)
THIS CLASS B DIGITAL APPARATUS
MEETS ALL REQUIREMENTS OF THE
CANADIAN INTERFERENCE-CAUSING
EQUIPMENT REGULATIONS.
CET APPAREIL NUMÉRIQUE DE LA
CLASSE B RESPECTE TOUTES LES
EXIGENCES DU RÈGLEMENT
SUR LE MATÉRIEL BROUILLEUR
DU CANADA.
audio
cable
R
L
OUTPUT
Synthesizer (keyboard)
REMOTE
KBD IN
MIDI
cable
Connecting to
audio device (p.18)
MIDI OUT
ATTENTION:
CAUTION
RISQUE DE CHOC ELECTRIQUE
RISK OF ELECTRIC SHOCK
NE PAS OUVRIR
DO NOT OPEN
WARNING:
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR
MOISTURE.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.OPERATION IS SUBJECT
TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.