Roland JP-8080 Owner's Manual page 14

Front and Rear Panel
28 SHIFT button
Use this button in conjunction with other buttons to access
functions printed on the front panel in a white box (e.g., RPS
[USER]). (p.65, 93, 99, 111)
EXIT button
29
Press this button to cancel an operation, etc..
You can press this button simultaneously with [SHIFT] to
hear the demo songs (p.21).
30 MOTION CONTROL 1/2 buttons
Press these buttons when you wish to use Motion Control (1/2)
(p.98).
THIS CLASS B DIGITAL APPARATUS
MEETS ALL REQUIREMENTS OF THE
CANADIAN INTERFERENCE-CAUSING
EQUIPMENT REGULATIONS.
CET APPAREIL NUMÉRIQUE DE LA
CLASSE B RESPECTE TOUTES LES
EXIGENCES DU RÈGLEMENT
SUR LE MATÉRIEL BROUILLEUR
DU CANADA.
EXT IN (external input) jacks
32
(VOCAL/UPPER, INST/LOWER (MONO))
Sound from an external source can be input here (p.26, 70, 106,
146–148). For mono input, use the INST/LOWER jack .
33 OUTPUT jacks (R, L (MONO))
These jacks can be connected to your amp or mixer system
(p.18). For mono output, use the L jack.
14
24
25
32 33 34
– Front /Rear Panel –
28 29 27
31 ARPEGGIATOR/RPS section
Here you can make arpeggiator/RPS settings (p.90, 92). You
can also record RPS patterns or register Motions.
Words printed in blue below sliders/knobs in the
3 EFFECTS section–
13
are Voice Modulator-related parameters.
You can use the sliders/knobs with these blue-printed
labels to modify Voice Modulator settings.
Voice Modulator settings are saved in the performance.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.OPERATION IS SUBJECT
TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
35
MIDI connectors (OUT, IN, REMOTE
34
KBD IN)
External MIDI devices can be connected here (p.18, 145). Use
MIDI cables (sold separately) to make connections.
35 AC inlet
Connect the included power cable to this inlet (p.18).
26
31
30
AMP ENVELOPE section
ATTENTION:
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
WARNING:
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR
MOISTURE.