Selecting A Patch; Copying The Upper Patch To The Lower - Roland JP-8080 Owner's Manual

Selecting a Patch

Patches (other than those which are saved within a perfor-
mance) are organized into the following groups.
USER: A 64
USER: B 64
PRESET1: A 64
PRESET1: B 64
:
PRESET3: A 64
PRESET3: B 64
CARD01: A 64
CARD01: B 64
:
CARD32: A 64
CARD32: B 64
:
CARD64: A 64
CARD64: B 64
* For a S2M-5 (2M bytes) memory card these will be
CARD01–32: A, B, and for a S4M-5 (4M bytes) memory
card these will be CARD01–64: A, B.
USER: A, B
This is the sound group inside JP-8080 which can be rewrit-
ten. Sounds you yourself create can be stored in this group.
With the factory settings, these contain the same patches as
Preset 2.
PRESET1–3: A, B
These are sound groups inside the JP-8080 which cannot be
rewitten.
CARD01–64: A, B
These groups use sounds from a memory card (optional)
inserted into the card slot. Sounds for which there is no
room in the internal USER group can be stored here. For
details on using a memory card, refer to p.128.
If you wish to play one of these Patches, call the desired
Patch into either the Upper or Lower Part of the
Performance.
Patches are selected by specifying three things: the group
(USER: A, B/PRESET1–3: A, B/CARD01–64: A, B), bank
(1–8), and number (1–8).
1
Press [PERFORM/PATCH SELECT] to make the
upper left of the display read "PATCH."
Patch Group
Bank
Number
2
Press PANEL SELECT [LOWER]/[UPPER] to select
the Part into which the Patch will be called.
You can press both [LOWER] and [UPPER] simultane-
ously to make both indicators light, and select the same
Patch for both Parts at the same time.
3
Use GROUP [DOWN]/[UP] to select a Group (U: A,
B, P1–3: A, B, C01–C64: A, B)
4
Press BANK [1]–[8] to select a Bank (1–8).
The indicator of the button you pressed will light.
5
Press NUMBER [1]–[8] to select a Number (1–8).
The indicator of the button you pressed will light.
The Patch has now been selected.
* You can also change patches by using [DEC]/[INC].
* CARD sounds can be selected only if a memory card is
inserted into the CARD slot. (p.128)
* When selecting patches from a memory card, it is not
possible to select patches from a group to which nothing
has ever been written.
* For the patch numbers and their content, refer to "Patch
List." (p.179)
To select a patch which has been saved within a
performance
First, the patch which has been saved within a performance
must be saved to USER or CARD (p.128). Then you can
select that patch.
Copying the Upper Patch to
the Lower
You can copy patches between the Upper and Lower parts
of the currently selected performance, or swap patches.
By layering two copies of the same patch with a slight dif-
ference in their pitch, you can create a more spacious sound.
The Patch Copy operation is convenient when you wish to
create this type of sound.
1
Press [EDIT].
The [EDIT] indicator will light and the BANK [1]–[8]
indicators will blink.
2
Press [INIT/UTIL] (BANK [7]) several times to
access the Copy display.
The [INIT/UTIL] indicator will light.
3
Use [DEC]/[INC] several times to select a copy type.
61