Roland JP-8080 Owner's Manual page 27

1
As shown in the diagram, connect the EXT IN jacks and the synthesizer's (keyboard's)
OUTPUT jacks.
2
Select a sound on the synthesizer (keyboard).
3
Select performance P2: 87. (p.23)
4
Play your synthesizer (keyboard), and you will hear the sound that you selected on the
synthesizer.
5
Use the EXTERNAL INPUT section [INST/LOWER]/[VOCAL/UPPER] to adjust the vol-
ume.
The sound that is input to the EXT IN jack VOCAL/UPPER will be assigned to the Upper part, and the
sound that is input to the EXT IN jack INST/LOWER will be assigned to the Lower part.
P2: 87 is a performance which uses the external inputs. You will hear no sound unless sound is being
input to the EXT IN jacks.
Settings have been made so moving the sliders or knobs will simultaneously modify both the Upper and
Lower sounds. Use the various functions described below to modify the sound in.
* Be aware that selecting a sound on your synthesizer (keyboard) in step 4 or later will cause the JP-8080's
performance to change as well. (p.60)
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
For more details on external input settings
"Using the External Inputs" (p.70)
To learn how the external input can be used
"Various Ways to Use Voice Modulator" (p.146)
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
27