Saving Data; Using A Memory Card (Smartmedia); Before Using A Memory Card - Roland JP-8080 Owner's Manual

7
Press [EDIT] or [EXIT].
The name has now been modified.

Saving Data

Specify the save destination (internal USER/memory card),
and save the performance or patch.
If you wish to save data on a memory card, make sure that a
formatted memory card (p.129) is inserted in the card slot.
1
Press [PERFORM/PATCH SELECT] to specify
whether you are saving a performance or patch.
In the case of a performance, the upper left of the dis-
play will read "PERFORM," and in the case of a patch it
will read "PATCH."
2
If you are saving a patch, you will also need to
press PANEL SELECT [LOWER]/[UPPER] to select
the part.
3
Press [WRITE].
4
Use GROUP [DOWN]/[UP] to select the save desti-
nation group.
<When saving a performance>
U: USER
C01: CARD01
:
C32: CARD32
:
C64: CARD64
<When saving a patch>
U: A, U: B: USER A, USER B
C01: A, C01: B: CARD01 A, CARD01 B
:
C01: A, C01: B: CARD01 A, CARD01 B
:
C01:A, C01:B: CARD01 A, CARD01 B
5
Press BANK [1]–[8] to select a Bank (1–8).
6
Press NUMBER [1]–[8] to select a Number (1–8).
* You can also use [DEC]/[INC] to select the bank and
number.
7
Press [WRITE].
The display will indicate "Completed" and the previous
display will reappear.
The Performance/Patch has now been stored into memory.
If you have modified the name, the data will be saved
under that name.
* The Patches stored within a Performance are displayed
as "UPPER" and "LOWER." Be aware that the original
Patch numbers are not displayed.
128
* If you save sound data to a group into which no data
was ever written before, initialized data (INIT PERFOR-
MANCE: p.142, 143, INIT PATCH: p.143) will be auto-
matically written into all other locations of that group.
Using a Memory Card
(SmartMedia)
JP-8080 can use an optional memory card (S2M-5 (2MByte)
or S4M-5 (4MByte)).
Use this card when you wish to save data for which there is
no more space in the internal USER group, or so that the
data you created can be used on another JP-8080.
Memory card must be formatted before they can be used.

Before Using a Memory Card

* The power of the JP-8080 must be turned off before
inserting or removing a memory card. If a memory card
is inserted when the power is turned on, the data in the
memory card may be destroyed, or the memory card
may become unusable.
* Be sure to insert the memory card all the way into the
slot.
* Do not touch the contacts of the memory card, or allow
them to become soiled.
* Never remove the memory card or turn off the power
while an operation (formatting, or data read/write) is
being performed on the memory card. Doing so will
destroy the data in the memory card and/or render the
memory card unusable.
* If you affix the write protect label to the write protect
area of the memory card, it will be impossible to format
the card or write data to it. If you wish to format the
card or write data to it, do so without the label affixed.
For details on the write protect label, refer to the instruc-
tion included with your memory card.
If you attempt to format the card or write data to it when
the write protect label is affixed, the following message will
appear.