Changing The Parameter Assigned To [Control 1]/[Control 2]; Setting The Switches; Making Voice Modulator Delay Settings - Roland JP-8080 Owner's Manual

Changing the Parameter Assigned to
[CONTROL 1]/[CONTROL 2]
Control1 Assign
Control2 Assign
When you use panel select to select the Voice Modulator
Panel (p.111), you can use the knobs/sliders labeled in blue
characters to set Voice Modulator parameters.
These Voice Modulator parameters can be freely assigned to
[CONTROL 1]/[CONTROL 2] of the Voice Modulator sec-
tion.
[CONTROL 1]/[CONTROL 2] of the Voice Modulator sec-
tion are always valid if the Voice Modulator [ON] switch is
turned on.
This means that regardless of the panel select status, you
will always be able to adjust two Voice Modulator parame-
ters in realtime.
The following parameters can be assigned.
ENSEMBL LEVEL
V DELAY TIME (Voice Modulator Delay Time)
V DELAY FEEDBACK
(Voice Modulator Delay Feedback)
V DELAY LEVEL (Voice Modulator Delay Level)
* VOCAL MIX
V RESONANCE (Voice Modulator Resonance)
* V RELEASE
(Voice Modulator Envelope Release Time)
V PAN (Voice Modulator Pan)
V LEVEL (Voice Modulator Level)
* V NOISE CUTOFF
(Voice Modulator Noise Cutoff)
* GATE THRESHOLD
* ROBOT PITCH (Robot Oscillator Pitch)
* ROBOT CONTROL (Robot Oscillator Control)
* ROBOT LEVEL (Robot Oscillator Level)
CHARACTER 1–12
* Parameters marked by an asterisk (*) are ignored when
the algorithm is set to "FLT BANK WIDE" or "FLT
BANK NARROW." The display will indicate an "x" to
indicate that these parameters are invalid.
* For the meaning of each parameter, refer to p.112–114.

Setting the Switches

Here's how to set switches
in "Internal structure of the JP-8080" (p.104).
Ext->Inst Send
(External To Instrumental Send Switch)
Turn this on when you want the sound from the EXT IN
INST/LOWER jack to be input directly to the Inst Input of
the Voice Modulator.
Ext->Vocal Send
(External To Vocal Send Switch)
Turn this on when you want the sound from the EXT IN
VOCAL/UPPER jack or the sound from the MIC jack to be
input to the Vocal Input of the Voice Modulator. Be sure to
turn this on when you want to use the formant filter and the
vocal morph control.
Making Voice Modulator Delay
Settings
This delay is dedicated to the Voice Modulator, and is sepa-
rate from the delay provided in the EFFECTS section.
V Delay Type
(Voice Modulator Delay Type)
Select the type of delay that will be applied to the output of
the Voice Modulator.
PANNING L->R: Pan the delayed sound to left and right in
the order of left->right.
PANNING R->L: Pan the delayed sound to left and right in
the order of right->left.
PANNING SHORT: Pan the delayed sound to left and right
in the order of right->left. The delay time is one quarter that
of PANNING L->R/R->L.
MONO SHORT: The delay sound will be heard from the
center. The delay time is the same as for PANNING
SHORT.
MONO LONG: The delay sound will be heard from the cen-
ter. The delay time is double the length of PANNING L->R/
R->L.
and which were explained
OFF, ON
OFF, ON
109