Battery; Display - Motion Computing CL900 User Manual

Tablet pc
Table of Contents

Advertisement

The display goes black while the tablet PC is still turned on
The computer might have turned off the display to save power. To restore the display,
touch the screen with your finger or the pen.
The computer might have gone into Sleep mode. Press and hold the power button for
about one second.
The computer might have gone into low-battery Hibernation mode. In Hibernation
mode, the power status light is off. Plug the computer in to AC power, then press and
hold the power button for about one second.

Battery

The battery does not last very long (less than eight hours)
Hot or cold conditions can adversely affect the battery charge. Use AC power if you are
operating the computer in these conditions.
Accessory devices such as a DVD player and applications that make heavy use of the
hard drive can drain the battery more quickly. Remove the accessory devices or use AC
power if possible.
Condition the battery once a month by using the tablet on battery power and allowing
the battery charge to drop below 20 percent before connecting the battery to AC power.
For other battery optimizing tips, see "Battery and power management tips" on page 32.
Have the battery replaced. While the built-in lithium-ion battery is designed for a long
battery life, you may find the need to replace it. If so, contact your Motion Computing
service provider. Only authorized service providers can replace the battery.

Display

When I connect to an external monitor, the cursor appears on the external monitor
and not on my tablet
This is a known Windows 7 issue. If you have multiple touch-enabled displays, Windows
may not assign touch to the correct display. To fix this issue, follow the procedure in
"Adjusting tablet PC settings" on page 19.
When I disconnect an external monitor, the desktop area is larger than the tablet PC
display
The computer may have expanded the desktop beyond the display area of the tablet PC
display when it was connected to the external monitor. Use Motion Dashboard to set the
tablet PC as the active display to return it to the normal state.
1. Open
2. Tap Display.
3. From the Display Scheme drop-down list, select Tablet Only to make the tablet PC
44
Chapter 4
Troubleshooting and FAQs
Motion
Dashboard.
the primary display.
Troubleshooting

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CL900 and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Cl900 fws-001

Table of Contents