Motion Computing CL900 User Manual page 29

Taking photographs with the documentation camera
After setting up the documentation camera and starting the Photo Paint app from
ExTOUCH, you can begin to take photographs with your CL900.
To take a photograph:
1. If it is not currently the default camera, open Microsoft Silverlight and select USB 3M
DocCam.
2. Open the ExTOUCH tool bar, launch the ExTOUCH main window, then start the Photo
Paint app. See "Setting up the cameras" on page 23 for details.
3. Frame the subject of your photograph within the camera window and tap the camera
icon as shown:
4. If desired, edit the photo.
5. Tap the Save icon as shown:
6. To exit the camera, tap the X at the top of the window.
Chapter 2 Using your CL900
camera icon
save icon
Using the cameras 25