Using Speech Recognition; Setting Up Speech Recognition - Motion Computing CL900 User Manual

4. Open
5. Tap Display.
6. Select a Display Scheme.
N : After setting up an external monitor, touch events may not appear on the appropriate
OTE
monitor. For example, if you have multiple monitors, Windows may not assign touch to the
correct display. To fix this, see "Adjusting tablet PC settings" on page 19.
To learn more about custom monitor schemes, go to Motion Computing tips.

Using speech recognition

You can use speech recognition to interact with your tablet PC by voice. You can dictate
documents and emails or use voice commands to control programs.
•
Dictation mode—With Dictation mode, your computer listens to everything you say
and converts your words to text. You can use dictation mode to enter text directly into
any document or text box.
•
Voice command mode—With Voice command mode, your computer listens for specific
words that correspond to a list of available voice commands. You can use commands to
switch between programs, save documents, copy, paste or undo.

Setting up speech recognition

Before you can use speech recognition, you must configure the microphones and train the
system for the characteristics of your voice. Then, you can take the available speech tutorial
to learn basic voice commands.
Set up the microphones
For best results, move to a quiet environment.
To set up the microphones
1. In Control Panel, tap the Ease of Access category, then tap Speech Recognition.
2. Tap Set up microphone.
3. If you are using the integrated tablet PC microphone array, select Other.
4. Follow the instructions in the setup program.
5. If the microphones are set to an appropriate level, the meter will stay in the green zone
while you read the sentences. If the level is too low or too high, use Motion Dashboard to
adjust the level (page 14).
Chapter 2 Using your CL900
Motion Dashboard
.
Using speech recognition 29