Attaching The Pen Tether - Motion Computing CL900 User Manual

6. Tap Touch Input.
7. Press the Enter key until you see the instructions appear on the display that you want to
use for touch input.
8. Follow the on-screen instructions.
9. Press Esc to end the process.

Attaching the pen tether

The pen comes with a tether so that you can attach the pen to your tablet or docking
station to avoid misplacing it. The tether is essentially a string with loops at each end.
When attaching the pen tether, loop one end of the tether through the pen then loop the
other end to the tether attach point on the tablet or docking station as shown below.
T : You may find it helpful to use the end of a paperclip or something similar to assist threading
IP
the loop through the tight space.
20 Chapter 2 Using your CL900 Using touch