Setting Or Clearing A Hard Disk Password - Motion Computing CL900 User Manual

N : To clear a BIOS password, press Enter twice, which leaves the Enter New Password fields
OTE
blank, then tap Enter.
7. If you want to require the user to enter the password when the system starts, select
Enable Password on boot.
8. Tap Password on Boot then Enabled.
N : To no longer require the password on boot, select Disabled.
OTE
9. Tap Enter.
10.At the confirmation message, "Changes have been made, " tap Continue or press Enter.
11.Tap Exit then Exit Saving Changes or press F10 to save the changes and start Windows.

Setting or clearing a hard disk password

You can use a hard disk password to protect the tablet and its hard disk drive.
WARNING:
without it and the data on the hard disk drive cannot be accessed—even if it is removed
and attached to a different computer.
To set up or clear a hard disk drive password
1. Start the tablet.
2. When the Motion Computing splash screen appears, touch the screen.
An alert sounds when you've accessed the BIOS Setup Utility. If you miss the splash
screen, restart the computer and try again.
T : If a keyboard is attached, you can press the F2 to open the Setup Utility, then press the
IP
arrow keys to select items, then press Enter to select a submenu.
3. Tap Security on the top menu bar.
4. Tap Set Hard Disk Password.
5. If a password is currently required, type the password using the on-screen keyboard and
tap Enter.
6. Type the new password and tap Enter. To confirm, re-enter the password, then tap
Enter.
N : To clear a hard disk password, press Enter twice which leaves the Enter New Password
OTE
fields blank, then tap Enter.
7. At the confirmation message "Changes have been made, " tap Continue or press Enter.
8. Tap Exit, then Exit Saving Changes or press F10 to save the changes and start
Windows.
Chapter 2 Using your CL900
If you set up a hard disk drive password, the computer cannot be started
Setting or clearing a hard disk password 35