The data type Counts represents raw, digitized data (i.e. no calculations have been
performed on the data) from the CCD detector's analog to digital (A/D) converter.
Refer to the detailed specification accompanying your particular CCD detector for
the number of electrons that correspond to 1 count.
Counts (Background Corrected) is digitized Data from the CCD detector's analog to
digital (A/D) converter, where Background (or dark signal) has been removed.
Counts (Bg. Corrected) = Signal - Background
%Absorptance represents the light absorbed by an object. If Reference is the
background corrected incident intensity, and Signal - Background the transmitted
intensity (i.e. the intensity of light which has passed through the material being
examined), then:
% Absorptance = 100 x (1 - (Signal - Background) / Reference)
Percentage Reflectance represents the light reflected by an object. If Reference
is the background corrected incident intensity, and Signal - Background the reflected
intensity (i.e. the intensity of light which has been reflected from the material being
examined), then:
% Reflectance = 100 x (Signal - Background) / Reference
CHOOSING THE DATA TYPE
Page 90
Counts
Counts
(Bg. corrected)
%Absorptance
%Reflectance
Section 4 . 6