Andor Technology iXon Ultra 897 User Manual page 100

Clicking the Rescale button on the button bar of the Main Window, when a Data
Window is open, causes the system to display against an appropriate data scale (and,
in the case of Image Display Mode, in appropriate colors or grayscale tones) all data
that falls within your selected range on the x-axis.
In addition the Rescale Data Mode item on the Display Menu allows you to
select (by means of two further 'tickable' sub-menu items) whether your rescaled
data distinguishes values between the minimum and the maximum (min...max);
between zero and the maximum (0...max); or between 0 and 65535 (0...65535), the
maximum number of counts that can be recorded for a single pixel. Autoscale
Acquisition (see SECTION 4.4 DATA ACQUISITION - Making an Acquisition)
performs a similar function for the display of data as they are being acquired.
Rescale is available for all the Display Modes. The following comments take
rescaling in Image Display Mode as a specific example. Image Display Mode is
used to display the members of a Kinetic Series as an image (each member of the
series forms a row of the image.)
Rescale: From Data To Image
Schematic
Data-Axis
(Intensity)
Max
Min
Y-Axis
(Chip Height)
X-Axis
(Chip Width)
Range = Max- Min
(Color,
Grayscale Palette)
DISPLAYING DATA
Image
(Rescaled)
Page 100
Rescale
Section 4 . 7