THE CONTROLLER CARD
· AUX OUT – Pins 6, 7, 8 and 14 provide up to 4 auxiliary output channels. The
outputs are SN74128 50 Ù TTL output driver that can be controlled via the Andor
Basic language.
WARNING: Pins 11, 12 and 13 are RESERVED, these pins are not available for
auxiliary use. Do not make electrical connection to these pin locations when
attaching external devices via the Controller Card Auxiliary Connector port or
damage may occur to the Controller Card, the Detector Head, or your external
device.
Section 8 . 2
Page 163