Andor Technology iXon Ultra 897 User Manual page 126

SHUTTER CONTROL
sequence, introducing an appropriate delay between the start of the shutter closed
state and the commencement of the data being read out.
If you do not have a shutter connected, set the Time to open or close to 0. Setting
the Time to open or close to any other value will insert extra delays into cycle time
calculations. See the diagram below.
Signals and Delays
Shutter
(= Exposure
Shutter
Fire
Read
Trigge
Fire Pulse
Time to Time to
(Shutter Transfer (Shutter Transfer
Section 4 . 11
Page 126