Setting Up And Interfacing; 1-Open The Top Cover; 2-Install The Toner Container - Kyocera FS-1750 Installation Manual

4. Setting Up and Interfacing

Before you can use the printer for the first time, you must set up the printer by installing
the printer components and interfacing with the computer. Follow the steps that follow.
1—Open the Top Cover
1.
Remove the packing tape from the printer.
2.
Open the printer top cover all the way.
2—Install the Toner Container
1.
Take the toner container from the toner kit.
2.
With the label side down, thoroughly shake
the toner container (in the direction of the
arrow) ten times or more to loosen and mix
the toner inside.
3.
The bottom of the toner container is sealed
with a sealing strip. Peel off the seal on the
toner container and carefully pull off and
dispose of the sealing strip.
Be sure to peel the seal off the toner con-
tainer before the toner container is fitted
into the developer unit.
4.
Install the toner container on the developer
as show in the figure.
4. Setting Up and Interfacing
Top Cover
Toner Container
Sealing strip
Developer Unit
7