Battery Mode; Standby Mode - Eaton 5125 User Manual

Battery Mode

When the UPS is operating during a power outage, the alarm beeps
once every four seconds and the
When utility power returns, the UPS transfers to Normal mode operation
while the battery recharges.
If battery capacity becomes low while in Battery mode, the
flashes and the alarm beeps twice every two seconds. Immediately
complete and save your work to prevent data loss and similar difficulties.
When utility power is restored after the UPS shuts down, the UPS
automatically restarts.

Standby Mode

When the UPS is turned off and remains plugged into a power outlet,
the UPS is in Standby mode. The
indicators are off, indicating that power is not available to your
equipment. The battery recharges when necessary.
NOTE For 230V models, the output receptacles may remain electrically live (up to 115V).
Unplug the UPS to ensure power is not available to the output receptacles.
Eaton 5125 Tower UPS (1000–2200 VA) User's Guide
+ -
indicator illuminates.

indicator flashes and the bar graph
S 05147304 Rev C www.eaton.com/powerquality
OPERATION
indicator
33