Eaton 5125 User Manual page 27

NOTE A small amount of arcing may occur when connecting the batteries. This is normal
and does not damage the unit or present any safety concern.
5. Connect the internal battery connector(s) (see Figure 5).
6. Replace the metal battery cover.
7. Replace the UPS front cover.
8. Continue to the following section, "Installing the UPS."
Eaton 5125 Tower UPS (1000–2200 VA) User's Guide
1000 VA
Figure 5. Connecting the Internal Battery Connector(s)
S 05147304 Rev C www.eaton.com/powerquality
INSTALLATION
1500 VA 2200 VA
21