Connecting The Ups Internal Battery - Eaton 5125 User Manual

INSTALLATION

Connecting the UPS Internal Battery

20
Eaton 5125 Tower UPS (1000–2200 VA) User's Guide
To ensure proper battery operation:
1. Verify that the UPS is off and unplugged.
2. Remove the UPS front cover (see Figure 2).
Figure 2. Removing the UPS Front Cover
3. Slide up and remove the metal battery cover (see Figure 3).
1000 VA
4. Remove the protective label from the internal battery connector
(see Figure 4).
1000 VA
Figure 4. Removing the Protective Label
1500 VA
Figure 3. Removing the Battery Cover
1500 VA
S 05147304 Rev C www.eaton.com/powerquality
2200 VA
2200 VA