Sample Network Configuration File - Tally T8006 User Manual

Sample Network Configuration File

--- General Menu
NODE_ADDR.
ROOT_PWD.
USERS.
BASE URL.
HP_JETADMIN.
DEF_OUT.
--- TCP/IP Menu
TCP_ENB.
INT_ADDR.
DEF_ROUT.
NET_MASK.
PROS_PWD.
PROS_PRT.
A sample parameter list used to configure the network interface is shown
below. The config file parameter names and their default values are listed
on the left side of the parameter list and simplified explanations of the
parameters are listed on the right side.
The sample parameter list shows the default values of a configuration file.
For this example, the Ethernet address is 0:0:87:90:d6:a1, and the factory
set printer name is PS90D6A1. The last six digits of the printer name
(90D6A1) are the six low-order digits of the Ethernet address.
: 00 00 87 90 D6 A1
: pass
:
: www.Tally.com/printer
: AUTO_SENSE
(AUTO_SENSE, YES, NO)
: PR1 (PR1, PR2, PR3,
PR4, PR5, PR6,PR7,
PR8, LPT1)
: YES
: 0 0 0 0
: 0 0 0 0
: 0 0 0 0
: netprinter
: 35
Appendix E Network Management
Node address
root password
User authority and printer
access
Default base URL address
HP emulation setting
Internal print output destina-
tion
Whether the TCP/IP protocol
is valid
IP address
Default router address (0.0.0.0
when no router is supported)
Subnet mask (0.0.0.0 for auto-
matic detection)
Must not be changed
Must not be changed
167