Setting The Fuser Cleaning Roller Counter To Zero - Tally T8006 User Manual

Tally T8006/T8306 Color Laser Printers User Guide

Setting the Fuser Cleaning Roller Counter to Zero

4. Press either TRAY/ or MEDIA/
5. Press MENU/ENTER/
6. Press MENU/ENTER/
16
Printer software tracks fuser cleaner roller usage. After the counter
reaches a pre-set number, the printer displays a message to indicate that
maintenance is necessary.
After initial installation, or whenever you replace the fuser cleaning roller,
set the counter to zero.
FC. Roll Execute.
the display will show Completed Clear FC. Roll.
Clear FC. Roll.
1. While pressing the power switch, press
and hold MENU/ENTER/
Note:
For more information about displayed
error messages, see "Appendix D Control Panel
Messages" on page 141.
2. When PLEASE WAIT is displayed,
release MENU/ENTER/
play will show Utility Menu Clear FC.
Roll.
3. Press MENU/ENTER/
play will show Clear FC. Roll Not
Execute.
until the display shows Clear
once, and after approximately 10 seconds,
. The display will show Utility Menu
.
. The dis-
. The dis-