Table of Contents
Advertisement
Tally T8006/T8306 Color Laser Printers User Guide
Setting up a Network Printer in Windows
Configuring Windows 95/98 to Print Using NetBEUI
26
The Tally auto-install CD-ROM automatically installs the drivers and
utilities your computer needs to print using the NetBEUI protocol. If you
are uncertain whether your network settings are correct for printing over
the network, consult your Windows 95/98 Help. To install the network
printer software on a computer using NetBEUI:
1. Insert the CD in your CD-ROM drive.
2. Click the language you want to use.
3. Click the I Accept button.
4. Click the T8006 - Install Software button or the T8306 - Install
Software button.
5. Click the Network button to configure the computer for network
printing.
6. Click the Install Printer Driver button to install the drivers.
7. Click the Network Utilities button to install the network utilities.
8. When prompted by the installation wizard, choose Custom Install.
9. When prompted by the installation wizard select install NetPilot and
PrintMonitor.
10. Click Exit This CD to complete the software installation process.
Note:
By default, your printer is installed on LPT1 — the physical
printer port of your computer. To print over the network, you must now tell
Windows to print over a virtual printer port rather than the physical port.
11. From the Start button, select Settings and click Printers.
12. In the Printers folder, right-click the T8006 or T8306 printer you just
installed.
13. Click Properties.
14. In the Printer Properties window, select the Details tab.
15. In the Print to the following port list, select the printer name.LP1
port. By default the printer name is "PS" followed by six letters and
numbers of the print server's node address; for example,
"PS1f83a5.LP1." See "Test Button for LAN Configuration" on
page 147 to obtain a LAN configuration page with your print server's
node address.
16. In the Printer Properties window, select the port you just added and
click OK.
Advertisement
Table of Contents
