Table of Contents
Advertisement
Operating Your Printer
Turning the Printer On
Turning the Printer Off
Selecting Media
1. Press the main power switch. The printer will perform a series of diag-
nostic tests and then begin the warm-up cycle. This process may take
up to 4 minutes.
2. Once the printer has completed the warm-up cycle, make sure the
printer display reads "Ready."
Note:
If the MESSAGE lamp is lit, a printer error has occurred. Check
the display for an error message, and take the appropriate action.
1. Ensure that the printer is not printing a job or warming up.
2. Press the power switch.
Note:
When restarting the printer, wait at least five seconds after turning
off the printer before turning it on again.
Loading your printer with the correct media is important in keeping your
printer running well. Because some types of paper may shorten the life
span of the printer components or quickly exhaust toner supplies, you
should use paper of the correct type, weight and size. Following the
guidelines for filling the paper trays listed below will maximize the
performance of your printer and the quality of your print jobs.
When loading transparencies, labels or envelopes, you must use Tray 1.
Chapter 4
37
Advertisement
Table of Contents
