Table of Contents
Advertisement
Network Management
Test Button for LAN Configuration
Printing a Print Server Test Page
Printing a Parameter List
Setting the Factory-Set Default Values
The test button is located near the LAN port. The following functions
can be executed by pressing the test button:
•
Printing a print server test page—this function is used to test the
printer connection.
•
Printing a parameter list to confirm the LAN port setting.
•
Setting the LAN port parameter values to the factory-set default
values.
The test button function is determined by the number of times the test
button is pressed. The following explains how to execute these functions.
Press the test button once (1 time) to output the test page.
After installing the printer, you can output a test page to confirm whether
the interface is functioning normally. Basic information about the LAN
port is printed on the test page, including the node address for the print
server.
Press the test button twice (2 times) to print the LAN port parameter
settings to the connected printer. All parameters and the current setting
values are printed in the parameter list.
To return the LAN port parameter values to the factory-set default values,
follow these steps:
1. Turn off the printer.
Appendix E
147
Advertisement
Table of Contents
