Config Menu; Timeout - Tally T8006 User Manual

Config Menu

Timeout

Tray1: Tray1: Tray1: Tray1: A4 A4 A4 A4
TestMode = TRANS* TestMode = TRANS*
TestMode = TRANS* TestMode = TRANS*
Note: If you specify TRANS, printing stops until the paper in Tray 1 is
replaced with transparencies.
The Config Menu allows you to configure the Timeout, SleepTime, Port
Priority and Display functions.
The Timeout function allows you to choose how long the printer will wait
after a break in data reception before it moves on to the next job. You can
set Timeout for 5 to 999 seconds (the default Timeout setting is 300
seconds).
The following example shows how to change the Timeout setting from
300 to 600 seconds.
Tray1: Tray1: LTR. LTR.
Tray1: Tray1: LTR. LTR.
Ready Ready Ready Ready
Tray1: Tray1: LTR. LTR.
Tray1: Tray1: LTR. LTR.
Not Ready Not Ready Not Ready Not Ready
Tray1: Tray1: Tray1: Tray1: LTR. LTR. LTR. LTR.
Test Menu Test Menu Test Menu Test Menu
Tray1: Tray1: Tray1: Tray1: LTR. LTR. LTR. LTR.
ConfigMenu ConfigMenu
ConfigMenu ConfigMenu
Tray1: Tray1: Tray1: Tray1: LTR. LTR. LTR. LTR.
Timeout Timeout Timeout Timeout
Appendix C Control Panel Menu Functions
9. Press the key to enter the setting
into memory.
10. Press the ONLINE key to resume
normal operations.
1. Check that Ready appears on the dis-
play and the DATA light is off.
2. Press the ONLINE key to go offline.
3. Press the MENU key to enter the
menu.
4. Using the and
figMenu.
5. Press the key to enter Config-
Menu.
keys, select Con-
125