Table of Contents
Advertisement
Tally T8006e Color Laser Printers User Guide
Setting up a Network Printer in Windows
Configuring Windows to Print Using TCP/IP
24
The Tally auto-install CD-ROM automatically installs the drivers and
utilities your computer needs to print using TCP/IP. If you are uncertain
whether your network settings are correct for printing over the network,
consult your Windows Help for your operating system. To install the
network printer software on a computer using TCP/IP:
1. Insert the CD in your CD-ROM drive.
2. Click the I Accept button.
3. Click the T8006e - Install Software button.
4. (Windows 95/98/ME only) To begin the local installation process,
click Network.
5. Click the Install Printer Driver button to install the printer drivers.
6. (Windows 2000 and Windows XP only) If Windows prompts you
that the driver's Digital Signature was not found, click Yes to con-
tinue the installation.
7. (Windows 95/98/ME only) Click the Network Utilities button to
install the network utilities.
8.
(Windows 95/98/ME only) Follow the installation wizard to install
Print Monitor.
9. Click Exit This CD to complete the software installation process.
10. To complete the installation of the printer, assign the printer an IP
address, subnet mask, and gateway, then go to the port configuration
section for your operating system.
Advertisement
Table of Contents
