Sleeptime - Tally T8006 User Manual

Tally T8006/T8306 Color Laser Printer User Guide

SleepTime

126
Tray1: Tray1: Tray1: Tray1: LTR. LTR. LTR. LTR.
Timeout = 300* Timeout = 300*
Timeout = 300* Timeout = 300*
Tray1: Tray1: LTR. LTR.
Tray1: Tray1: LTR. LTR.
Timeout = 600 Timeout = 600 Timeout = 600 Timeout = 600
Tray1: Tray1: LTR. LTR.
Tray1: Tray1: LTR. LTR.
Timeout = 600* Timeout = 600* Timeout = 600* Timeout = 600*
SleepTime allows you to set the amount of time the printer will wait
before it enters sleep mode (from 5 to 240 minutes). When in sleep mode,
the printer uses less power (the default SleepTime setting is 30 minutes).
The following example shows how to change the SleepTime setting from
30 minutes to 15 minutes.
Tray1: Tray1: Tray1: Tray1: EXE. EXE. EXE. EXE.
Ready Ready
Ready Ready
Tray1: Tray1: Tray1: Tray1: EXE. EXE. EXE. EXE.
Not Ready Not Ready
Not Ready Not Ready
Tray1: Tray1: EXE. EXE.
Tray1: Tray1: EXE. EXE.
Test Menu Test Menu Test Menu Test Menu
Tray1: Tray1: EXE. EXE.
Tray1: Tray1: EXE. EXE.
ConfigMenu ConfigMenu ConfigMenu ConfigMenu
Tray1: Tray1: Tray1: Tray1: EXE. EXE. EXE. EXE.
Timeout Timeout Timeout Timeout
6. Press the key to enter the Timeout
submenu. The display shows the cur-
rent setting.
7. Using the and
desired setting.
8. Press the key to enter the setting
into memory.
9. Press the ONLINE key to return to
online mode.
1. Check that "Ready" appears on the
display and the DATA light is off.
2. Press the ONLINE key to go
offline.
3. Press the MENU key to enter the
menu.
4. Using the and
figMenu.
5. Press the key to enter Config-
Menu.
keys, select the
keys, select Con-