Mitsubishi Electric EY-3DGS-1U User Manual page 11

Problem
The power of the
3D Glasses turns
off automatically.
There is something
wrong with the 3D
images.
The indicator blinks
fi ve times when the
power of the 3D
Glasses is turned
on.
The indicator does
not light up even if
the power button is
pressed.
Solution
• Is there any block in the communication area between the
3D Emitter and the 3D Glasses? Or, is there a sticker or
other such item on the infra-red reception section on the 3D
Glasses?
When the signal from the 3D Emitter is interrupted, the
power of the 3D Glasses automatically turns off 5 minutes
after the interruption. Check that there is not any block in
the communication area between the 3D Emitter and the 3D
Glasses.
• Depending on the 3D image status, you may feel something
wrong with the 3D images.
Switch the "3D Sync" setting of the projector to check
whether or not the uncomfortable feeling is disappeared.
When the signal from the 3D Emitter is interrupted, the
power of the 3D Glasses automatically turns off 5 minutes
after the interruption. Check that there is not any block in
the communication area between the 3D Emitter and the 3D
Glasses.
• The 3D Glasses may become out of sync due to fl uorescent
light. Turn off the fl uorescent light.
• Is there any other 3D Emitter or 3D image supporting
television close to the 3D Glasses?
The 3D Glasses work by receiving signals from the 3D
Emitter. Check that there is no interference of the signals
from other infra-red emission section.
• The battery of the 3D Glasses dies.
Replace the battery with a new one.
• Does the battery of the 3D Glasses die?
Replace the battery with a new one if the indicator does not
light up even when you press the power button.
EN-11