Critikon DlNAMAP PRO Series 100-400 Operation Manual page 60

mW (max)
mW (max)
Red: 30
beats/min
Audible Indicator Pitch changes with
saturation; volume
selectable from 0 (off) to 9
Waveforms
Sensor Connect/
Disconnect From Patient
Pulse Detection
Loss of
Pulse
Sensor Light Source
Wavelength
Power Dissipation
Pulse plethysmograph
waveform on LCD gain
compensated
Monitor will detect
attachment or
disconnection of sensor
from patient within
15 s
Monitor will detect pulse
or enter no signal state
within 15 s of being
attached to patient
Monitor will detect loss of
pulse from patient and enter
no signal state within 10 s
Infrared: 920 nm (nominal)
Red: 660 nm (nominal)
Infrared: 22.5
f3
NEI_I_COR's sensor specifications.
Pulse Rate Range 30 to 250 beats/min
Accuracy
+2).
Note:
Refer to
+3, rather than
+_l
digit to account
for the theoretical effect on oximeter measurements of fetal
hemoglobin in neonatal blood (e.g.,
N-25 accuracy on neonates
is
100%)
When sensors are used on neonatal subjects as recommended,
the specified accuracy range is increased by
-
(70% Accuracv
OXISENSOR R-l 5 adult nasal sensor*
*Accuracy: 80% to 100%; 0 to 79%: unspecified.
3.5 digits
Neonatal
Appendix A