Time - Critikon DlNAMAP PRO Series 100-400 Operation Manual

I-*,
L.
55
P
dd/
mmm/yyyy; however, to avoid confusion the month number
has been substituted with a three-letter abbreviation. Leap
years are calculated automatically.
2Qhour format.
The
date is in the British format of
comm
Time
Selection of this button allows the operator to change the
internal time and date of the Monitor.
The clock, which is
maintained by an internal battery after power
down, uses
SpO, signal is detected
A BP
determination is started through the host
SpO, is not actively reporting patient statistics
The keys and
rotor
have not been used
for the preset
time
The Monitor is running from its battery
No determinations are
in progress
The Monitor
has been running from the battery
for the
entire preset
time
following
occur:
The
rotor is turned or pressed
Any of the keys are pressed
An alarm condition is issued
The battery supply level becomes discharged to a
critical level
A mains or suitable DC supply is connected
An
Auto BP or Temp determination starts
An
.
The Monitor awakens from
Sleep
mode if any of the
Monitor
enters
Sleep
mode only if the following
are true:
No alarm is active
.
.
-
POWER SAVE MENU
The
C Using the Menu System