Procedures - Critikon DlNAMAP PRO Series 100-400 Operation Manual

0X6-OJX
UK
Phone: 44-189-632-2700
1
Phone: 1-800-NELLCOR (USA) Fax: l-888-222-9799
UK Nellcor
10
Talisman Business Center
London Road
Bicester
Oxfordshire
MacDonnell Blvd
PO Box 5840
St. Louis, MO 63
134
_,
Procedures
1.
Select a sensor that is appropriate for the patient and the
clinical situation.
Warning: Do not use a damaged sensor or one with
exposed electrical contacts.
Note: Use
only NELLCOR
sensors, which are available
from:
USA Mallinckrodt, Inc.
675
,
.
A patient's vital
signs may vary dramatically during the use of
cardiovascular agents
such as those that raise or lower blood
pressure
or
those that increase or decrease heart rate.
l
The PRO Monitor is compatible only with NELLCOR sensors.
l
Software development, software validation, and Risk and
Hazard Analysis has been performed to a registered quality
system.
.
>T
General Notes
SpOZ function.
To prevent
such interference, cover the sensor with opaque material.
_,
lights, direct sunlight, operating room lights)
may interfere
with the performance of the
.
Bright light sources (e.g., infrared heat lamps, bilirubin
I
patients with compromised circulation (e.g., because of
peripheral vascular disease or vasoconstricting
medications).
l
Do not perform any testing or maintenance on a sensor
while it is being used to monitor a patient.