Spa - Critikon DlNAMAP PRO Series 100-400 Operation Manual

Inc.
34
SpOz. Refer to "Alarms Button" in the "Using the Menu
System" section.
*NELLCOR is a trademark of Mallinckrodt,
SpOz: levels are
outside the alarm limits. When a limit alarm occurs, a
message appears in Area 2 of the LCD display.
If you select the Alarms button, the Alarms menu appears.
This menu is used to adjust the violation limits for BP and
SpOZ saturation level.
The pitch is
highest at 100% oxygen saturation, and it
becomes
lower as
the saturation level falls. The Monitor can display a pulse
amplitude bar and a plethysmographic waveform on the
LCD (25). The pulse amplitude bar graph is proportional to
the arterial blood flow. The artifact indicator LED (24) lights
continuously when the Monitor detects motion sufficient
enough to affect readings.
Audible and visible alarms occur when
SpOz signal. A
tone sounds at a
rate corresponding to the pulse rate and at a pitch
corresponding to the
SpOz pulse indicator (20) flashes
synchronization
with the real-time pulse rate measurements
that are derived from the
(22), and the
Sp02 appears
in
the Pulse BPM
display
(23), which is continually updated.
Heart rate derived from
SpOz display
SpOz is the ratio of oxygenated
hemoglobin to hemoglobin that is capable of transporting
oxygen. This ratio, expressed as a percentage, is shown on
the
(SpOJ of arterial blood is
noninvasively and continuously monitored
in the
PRO Monitor using pulse oximetry technology from
NELLCOR*. Functional
SpOZ sensor on
the patient's finger; monitoring begins automatically.
Functional oxygen saturation
SpOz monitoring, simply place
the
SpOz parameter is included in Models 300 and 400. To
begin
spa,
Description
The