Set Bp Button (Uk: Bp Mode) - Critikon DlNAMAP PRO Series 100-400 Operation Manual

- 48
Notes
l
The Print button appears only when Print is set to Manual
mode.
. If
the printer is in Auto print mode, the data will be printed
automatically.
More... Button
Selection of
this button displays the More... menu. The More...
menu has six options (depending on model of Monitor), most of
which have submenus.
For
this reason, instructions for the More...
button are in a separate section.
Set BP Button (UK: BP Mode)
Selection of this button displays the Auto, Stat, and Manual BP menu.
Auto
BP
Manual
Tgt
Pressure
Auto
Selection of this option starts an
Auto
BP determination. When
Auto Mode is selected, a number at the right of the Auto button
indicates the time interval between each reading. To change the
time interval, choose the box around the number and turn the
rotor until the desired interval is reached. The interval can be set
between
1
and
120 minutes (1, 2, 3, 4, 5, 10, 15, 20, 25, 30, 45,
60, 90, and 120 minutes).
Press the rotor to confirm the setting.
After power-off, the operating mode returns to the default setting
of Manual. The default setting of Manual can be overridden to
return to the previous user-selected setting (Auto or Manual) by
selecting Set BP under the Service menu. To cancel an Auto BP
determination, select the Manual button in the Set
BP (UK: BP
Mode) menu.
Manual
Selection of this option starts a Manual BP determination. After
power-off, the operating mode returns to the default setting of
Manual. The default setting of Manual can be overridden to
return to the previous user-selected setting (Auto or Manual) by
selecting Set BP under the Service menu.