Predictive Temperature Determination - Critikon DlNAMAP PRO Series 100-400 Operation Manual

Alaris Medical Systems *IVAC is a trademark of
"F display
(13).
The default, which is
Celsius, can be changed in the Clinician Menu (please refer
to the "Using the Menu System" section of this manual).
"C
comms.
During a temperature determination, the temperature
display
(12)
provides a progress meter and probe ready
indicator. In the far-left position, a single horizontal line
indicates the probe is ready to start a determination after
removal from the probe holster. In the far-right position of
the temperature display, a "chase sequence" around the
outside space indicates a predictive temperature
determination is in progress. During monitor mode, the
temperature readings flash constantly.
Temperature is shown on the temperature display in
degrees Celsius or Fahrenheit, and the unit of measure is
indicated by the
IVAC* technology and can be
used with both oral and rectal temperature probes. Two
modes of operation are available: predictive and monitor.
In predictive mode, a final temperature is displayed with an
audible tone. In monitor mode, the display is updated
continually as the patient's temperature rises or falls.
Note: If the PRO is unable to complete a predictive
determination, then it enters monitor mode. These
temperature readings are not stored in trends and not
reported via host
Q
Description
The temperature parameter is included in Models 200 and
400. The PRO Monitor uses
five Tempera ture De termina tion
Predic
mmHg
for 4 seconds (adults),
unless the S-minute period has ended or the determination
has been canceled.
Note: Alarm limits are disabled while in Stat mode.
mmHg
for 8
seconds (neonates) or 15
Using the Monitor
arterial pressures and pulse rate will appear on their LED
displays (7, 9, 19, 22).
The Monitor will begin another
determination once the pressure is
below 5