Rotor; Display Button - Critikon DlNAMAP PRO Series 100-400 Operation Manual

Sp02 data are available) and any
error or warning messages that may appear. The Display
mode setting is maintained when the Monitor is switched
off and on.
NIBP is
selected, Area 2 of the LCD will remain blank except for the
pulse amplitude bar (if
SpO, nor
3
SpO, or
BP data.
If neither
1
Main
Selection of this button returns the user to the Main menu.
Display Button
Selection of this button displays the Display mode menu.
This menu is used to specify whether Area 2 of the LCD
will
display
1 Main
d
menu.
Rotor
Selection of this button displays a panel for setting the
volume of the beep that sounds when the rotor is turned.
The range of adjustment is Off (default) to 9, and the setting
is retained when the Monitor is turned off.
ROTOR BEEP
Volume 3
,
Main Selection of this button returns the user to the Main
,_
Accept.
Selection of
this button produces an advisory
to
the
user that the trend will be lost when the clock settings are
changed. Choosing Yes will cause the Monitor to accept the
new clock settings and erase the trend memory. Choosing
No will cause the Monitor to retain the existing clock
settings and the trend memory. Either choice returns the
user to the Main menu.
1 ,
,Year
, Mon
,
, ,
Day
,
Set
, Min
, ,
1 , Hour,
24-Aug-1999 :
21
11
.;
20