Oce TCS300 User Manual page 98

Define the colour settings
create or edit the file. If there is no embedded colour profile present in the document,
the printer checks the file type of the document and based on the file type the printer
applies the default colour management settings of the Océ Settings Editor.
If you want to use the embedded colour profile for your print job (for example,
embedded profile created with Adobe
options. You can use the WPD driver where you can indicate to follow the colour
settings managed by the application. You can also send the job via FTP or LPR. If
the controller can recognise the embedded colour profile, it will be applied. If the
embedded colour profile cannot be recognised, the controller applies the default
colour settings managed by the Océ Settings Editor.
The table below gives an overview of the relation between the job submission
method, the file type and the colour management settings
[40]
Job submission
method
Windows printer driver The driver converts all
HDI printer driver
98 Chapter 6 Ensure the best output quality
®
Illustrator) you can choose between 2
File type
files into HP-GL/2
The driver converts all
files into HP-GL/2
Colour management settings
You can define the colour
settings in:
The printer driver.
The Océ Settings Editor, by
choosing the printer's
default in the driver settings.
The application, by
choosing the setting 'None,
managed by application' in
the driver
You can define the colour
settings only in the Océ
Settings Editor, the driver has
no colour settings and uses the
printer's defaults for colour
jobs.
You can adjust the default
colour settings for the HP-GL
path in the Settings Editor,
since the HDI driver converts
all the files into HP-GL/2