Table of Contents
Advertisement
[74]
The medium loads into the printer from the top of the media roll.
Make sure the medium makes contact with the paper guide.
The printer automatically draws the medium in the correct position.
6.
When the printer loads the roll of media, the screen of the printer operator panel
shows the feedback.
Note: The printer automatically detects the width of the media.
How to select the settings for the new roll of media
Attention: After you load a new roll of media, the screen of the printer operator
panel displays a wizard. Use the wizard to define the media type and the cut
option for the new media roll.
The screen displays the message 'Select media type on roll (number)'. Use the lower
1.
softkeys to select the media type.
[75]
[75] Select the media type
Note: The media types you can see on the screen are the three most recently used
media types. The default media type is the media type that you defined for the media
roll the last time. If you must select another media type, you can scroll down with the
Replace the media
135
Advertisement
Table of Contents
