Oce TCS300 User Manual page 153

Printhead error messages
The table below gives on overview of the printhead-related error codes.
[56]
Error code Description
4501 - 4509 Excessive leakage current
detected for head [1...9]
Printhead failing
Replace printed [1...9]
4551 - 4559 Head defective during printing
4571 - 4579 Head too hot during printing
4581 - 4589 Head [1....9] keeps heating
4951 - 4959 WOM memory failure for head
[ 1......9]
4961 - 4969 Heating of head [1......9] failed Continue printing until the message
Customer action
Replace the printhead by using the wizard.
Note: Never re-insert a
printhead that has caused this
problem.
Printhead is probably not placed correctly.
Remove and re-insert the printhead at the
original position.
Note: If the problem persists
you must replace the printhead.
You can ignore this problem by pushing the
'OK' button.
Note: If the problem re-occurs
after a short time you must
replace the printhead.
Replace the printhead by using the wizard.
Service warning only. No customer
intervention needed.
'Replace printhead' displays on the
operator panel.
Then replace the printhead by using the
wizard.
Overview
153